Skip to content
GitLab

Tastitalia SODIMM Starter Kit · Changes

Page history
Add to HW Manual Microfit, USB, JTAG, MIPI_CSI authored by Noah Rosa's avatar Noah Rosa
Show whitespace changes
Inline Side-by-side
Showing
with 134 additions and 0 deletions
Tastitalia-SODIMM-Starter-Kit.md
View page @ b57b9ee1
......@@ -79,6 +79,140 @@ Understanding the hardware components of your Tastitalia Kit is essential for su
</td></tr> </table>
### Microfit connector (1)
![Microfit.png](uploads/SODIMM_Kit/Microfit.png)
<table>
<tr><td>
| Pin | Function |
|--------|----------|
| 1 | RS485T2 |
| 2 | RS485T1 |
| 3 | RS232RX |
| 4 | RS232TX |
| 5 | GND |
| 6 | RS485_N |
| 7 | RS485_P |
</td><td>
| Pin | Function |
|--------|----------|
| 8 | CAN L |
| 9 | CAN H |
| 10 | GND |
| 11 | Can_T2 |
| 12 | Can_T1 |
| 13 | 5V |
| 14 | 5V |
</td></tr>
</table>
### USB 2.0 Connector / OTG (8/13)
![Alt text](uploads/SODIMM_Kit/usb.png)
| Pin | Function |
|--------|----------|
| 1 | **5V** *Not connected* |
| 2 | USB_D_N |
| 3 | USB_D_P |
| 4 | GND |
| 5 | **GND** *USB_ID* |
**Bold pins are only for the standard 2.0 port (8)** <br> *Italics pins are only for the OTG port (13)*
### JTAG Connector (12)
![jtag.png](uploads/SODIMM_Kit/jtag.png)
<table>
<tr><td>
| Pin | Function |
|--------|----------|
| 1 | JTAG_PWR |
| 2 | JTAG_TRSTB |
| 3 | JTAG_TDI |
| 4 | JTAG_TMS |
| 5 | JTAG_TCK |
</td><td>
| Pin | Function |
|--------|----------|
| 6 | GND |
| 7 | Not connected |
| 8 | JTAG_TDO |
| 9 | GND |
| 10 | nRESET |
</td></tr>
</table>
### MIPI CSI (16)
![MIPI_CSI.png](uploads/SODIMM_Kit/MIPI_CSI.png)
<table>
<tr><td>
| Pin | Function |
|--------|----------|
| 1 | GND |
| 2 | GND |
| 3 | GND |
| 4 | I2C1_SCL |
| 5 | GND |
| 6 | I2C1_SDA |
| 7 | MIPI_CSI1_CLK_N |
| 8 | GND |
</td><td>
| Pin | Function |
|--------|----------|
| 9 | MIPI_CSI1_CLK_P |
| 10 | GPIO1_IO04 |
| 11 | MIPI_CSI1_D0_N |
| 12 | GPIO2_IO8 |
| 13 | MIPI_CSI1_D0_P |
| 14 | GPIO2_IO7 |
| 15 | MIPI_CSI1_D1_N |
| 16 | GPIO2_IO6 |
</td><td>
| Pin | Function |
|--------|----------|
| 17 | MIPI_CSI1_D1_P |
| 18 | GND |
| 19 | MIPI_CSI1_D2_N |
| 20 | 5 V |
| 21 | MIPI_CSI1_D2_P |
| 22 | 5 V |
| 23 | MIPI_CSI1_D3_N |
| 24 | 1.8 V |
</td><td>
| Pin | Function |
|--------|----------|
| 25 | MIPI_CSI1_D3_P |
| 26 | 1.8 V |
| 27 | GND |
| 28 | 3.3 V |
| 29 | GND |
| 30 | 3.3 V |
</td></tr> </table>
# User Manual
The user manual section is your guide to setting up, configuring, and operating your Tastitalia Kit. It covers topics such as powering up the board, booting from different storage options, and basic troubleshooting.
......